Increase your knowledge to meet the requirements in your industry
Whether you need to increase your skills in the fields of Automation, Safety, Robots or Vision, we offer the same learning outcome remotely, in one of our Training Centres or on-site at the customer premises. To support your learning, online training courses are facilitated through our eLearning platform. Our Training Services are categorised by software and product groups, along with the type of delivery.

eLearning
Learn online about factory automation, sensing, safety, vision, robots, or panel components. Courses are accessible anytime, anywhere.

Remote Training
Our training courses are available as remote courses, delivered to you at your home, office or factory.

On-site Training
Our field Application Engineers (FAEs) and Trainers are accustomed in providing Field Application Service and Training On-Site.
Our Available Courses
TC01 - PLC Basic
This course is designed to introduce engineers and technicians to PLC's. The trainee is shown how to use all the features of CX-Programmer whilst being introduced to basic PLC hardware and programming techniques. The course is primarily hands-on using dedicated training equipment incorporating our CJ1 PLC's.
Type of training
TC02 - PLC Advanced
This course is designed to provide an operational knowledge of more advanced software instructions and programming techniques. With a “hands-on” approach, the trainee is introduced to the concepts of data shifting, indirect addressing and program flow operations, in addition to special I/O module set-up and addressing. Software design and documentation are covered in detail, along with the diagnostic tools available in CX-Programmer, enabling the user to quickly diagnose and correct process faults on their PLC controlled installation.
Type of training
TC04 PLC Structured Text
Designed as an introduction for engineers and technicians, the course covers the Structured Text language adopted within the CP, CJ and CS PLC’s.
Type of training
£435 | By arrangement |
TC05 PLC SFC Programming
This course is designed to introduce the engineer to understanding the advantages of using SFC (Sequential Flow Chart) programming. The trainee is shown how to implement an application in the SFC language.
Type of training
£435 | By arrangement |
TC101 - Customised One-to-One
This is a customised training course, for one attendee, designed to your specific needs. We will develop the course based on your specific requirements.
Type of training
£598 | By arrangement |
TC102 - Customised One-to-N
This is a customised training course, for up to 8 attendees, designed to your specific needs. We will develop the course based on your specific requirements.
Type of training
£544 | By arrangement |
TC103 - Customised On-Site
This is a customised training course designed to your specific needs. We will develop the course based on your specific requirements. In preparation, we can visit your site, and discuss your exact requirements.
Type of training
£1,632 | By arrangement |
TC11 - HMI Basic
This is an application course using NS Human-Machine Interface and the CX Designer software package. The course focuses on the integration of a PLC and HMI. The course is a mixture of theory and practical, covering all the basic aspects of NS operations. Full training equipment is provided to allow the trainee to complete a number of hands-on examples and practical problem solving.
Type of training
£435 | By arrangement |
TC114 - Collaborative Robots (Basic)
This course is designed to introduce engineers and technicians to the OmronTM collaborative robot.
Type of training
TC115 – Collaborative Robots (Advanced)
This course is ideally suited to engineers who have already attended the course ‘TC114 - Collaborative Robots (Basic)’, looking to use the advanced features of the Omron Collaborative robot.
Type of training
TC12 - HMI Advanced
This is an application course using NS HMI (Human Machine Interface) and CX Designer software package. The course focuses on the integration of a PLC and HMI. The course is a mixture of theory and practical hands-on covering the advanced aspects of the NS. Full training equipment is provided to allow the trainee to complete a number of hands-on examples and practical problem solving.
Type of training
£435 | By arrangement |
TC121 - Maintenance Training Course Specific to Sysmac
These courses are ideally suited for maintenance personnel and those who are involved in commissioning a machine equipped with NX/NJ controllers. But they are also for those who want to have a first introduction to the maintenance tools available for these products.
Type of training
£1,088 | By arrangement |
TC121 - Maintenance Training Course Specific to Sysmac
These courses are ideally suited for maintenance personnel and those who are involved in commissioning a machine equipped with NX/NJ controllers. But they are also for those who want to have a first introduction to the maintenance tools available for these products.
Type of training
£1,088 | By arrangement |
TC252 - Sysmac Pack 2 - NA HMI Visualisation & Motion
This course combines the TC54 and TC55 courses, on 3 consecutive days, to introduce engineers and technicians to Sysmac motion and the Sysmac NA HMI.
Type of training
TC253 - Sysmac Pack 3 - Sysmac Studio, NA HMI Visualisation & Motion (Sysmac week)
This course combines the TC51, TC54 and TC55 courses, to introduce engineers and technicians, to the integrated Sysmac solution, using the NJ controller NA HMI and Sysmac motion.
Type of training
TC51 - Sysmac Control Basic
This course is designed to introduce engineers and technicians to Sysmac controllers.
Type of training
TC53 - Sysmac Safety
The Sysmac Safety Course is an introduction to Omron’s Sysmac Safety Platform. It is for technicians and software engineers already familiar with Omron’s Sysmac Studio Software platform and the associated hardware.
Type of training
£653 | By arrangement |
TC54 - Sysmac Motion Control
This course is designed to introduce engineers and technicians to the fundamentals of Sysmac motion.
Type of training
TC55 - Sysmac NA HMI
This course is designed to introduce engineers and technicians to the Sysmac HMI, the NA.
Type of training
TC56 - Sysmac SQL
Designed to illustrate the powerful, yet easy, implementation of the Sysmac SQL data connection.
Type of training
£435 | By arrangement |
TC57 - Sysmac Structured Text
Designed as an introduction for engineers and technicians, the course covers the Structured Text language adopted within Sysmac Studio.
Type of training
£435 | By arrangement |
TC67 - MQTT(S) with the Sysmac Platform
This course is designed to train programmers and engineers the basics of using MQTT and MQTTS with Sysmac Platform Controllers.
Type of training
TC68 – OPC UA with the Sysmac Platform
This course is designed to train programmers and engineers the basics of using the OPC UA Server function with Sysmac Platform Controllers.
Type of training
TC01 - PLC Basic
This course is designed to introduce engineers and technicians to PLC's. The trainee is shown how to use all the features of CX-Programmer whilst being introduced to basic PLC hardware and programming techniques. The course is primarily hands-on using dedicated training equipment incorporating our CJ1 PLC's.
Type of training
TC02 - PLC Advanced
This course is designed to provide an operational knowledge of more advanced software instructions and programming techniques. With a “hands-on” approach, the trainee is introduced to the concepts of data shifting, indirect addressing and program flow operations, in addition to special I/O module set-up and addressing. Software design and documentation are covered in detail, along with the diagnostic tools available in CX-Programmer, enabling the user to quickly diagnose and correct process faults on their PLC controlled installation.
Type of training
TC04 PLC Structured Text
Designed as an introduction for engineers and technicians, the course covers the Structured Text language adopted within the CP, CJ and CS PLC’s.
Type of training
£435 | By arrangement |
TC05 PLC SFC Programming
This course is designed to introduce the engineer to understanding the advantages of using SFC (Sequential Flow Chart) programming. The trainee is shown how to implement an application in the SFC language.
Type of training
£435 | By arrangement |
TC11 - HMI Basic
This is an application course using NS Human-Machine Interface and the CX Designer software package. The course focuses on the integration of a PLC and HMI. The course is a mixture of theory and practical, covering all the basic aspects of NS operations. Full training equipment is provided to allow the trainee to complete a number of hands-on examples and practical problem solving.
Type of training
£435 | By arrangement |
TC12 - HMI Advanced
This is an application course using NS HMI (Human Machine Interface) and CX Designer software package. The course focuses on the integration of a PLC and HMI. The course is a mixture of theory and practical hands-on covering the advanced aspects of the NS. Full training equipment is provided to allow the trainee to complete a number of hands-on examples and practical problem solving.
Type of training
£435 | By arrangement |
TC13 - HMI NB
This is an application course using an NB Human-Machine Interface (HMI) and the NB Designer software package. The course Introduction to NB Designer focuses on the integration of a PLC and HMI. The course is a mixture of theory and hands-on.
Type of training
£435 | By arrangement |
TC25 - Variable Speed Drives Basic
The course is hands-on with each trainee operating their own inverter drive training unit. The course will start by explaining, in non-mathematical terms, how an AC electric motor works, and why varying the frequency causes speed change. By the end of the course, trainees will have gained an understanding of the application and operation of variable speed drives.
Type of training
£435 | By arrangement |
TC250 - Automation Pack – PLC Week
This course combines the TC01 and TC02 automation courses, on 5 consecutive days.
Type of training
TC55 - Sysmac NA HMI
This course is designed to introduce engineers and technicians to the Sysmac HMI, the NA.
Type of training
TC91 - Networking Fieldbus and EIP
This is a one day training course covering the wiring, installation, commissioning and programming of networks.
Type of training
£435 | By arrangement |
TC93 - Networking DeviceNet
This is a one day training course covering the wiring, installation, commissioning and programming of a DeviceNet system.
Type of training
£435 | By arrangement |
TC41 - Smart Vision
The Vision Sensor course is an introduction to Omron's Vision Sensors. It is for technicians, engineers and operators who either have little or no experience of the hardware and programming environment.
Type of training
£435 | By arrangement |
TC42 - Vision Systems Basic
The Vision Systems Basic course is an introduction to the FH Vision System for technicians and engineers who either have little or no experience of the FH programming environment.
Type of training
£435 | By arrangement |
TC114 - Collaborative Robots (Basic)
This course is designed to introduce engineers and technicians to the OmronTM collaborative robot.
Type of training
TC115 – Collaborative Robots (Advanced)
This course is ideally suited to engineers who have already attended the course ‘TC114 - Collaborative Robots (Basic)’, looking to use the advanced features of the Omron Collaborative robot.
Type of training
TC261 – Collaborative Robot Training Pack 1
This course combines the TC114 and TC115 Collaborative robot courses on 4 consecutive days
Type of training
TC271 – Fixed Robot Training Pack 1
This course combines the TCD21 and TCD35 fixed robot courses on 3 consecutive days.
Type of training
TC280 – Mobile Robot (AMR) Training Pack 1
This course combines the TCD24 and TCD25 mobile robot courses on 5 consecutive days, delivered at your site (subject to customer robot and fleet manager availability).
Type of training
TC281 – Mobile Robot (AMR) Training Pack 2
This course combines the TCD24 and TCD25 mobile robot courses on 5 consecutive days, delivered in our MK training room (subject to availability).
Type of training
TCD21 – eV+ Programming
This course is designed to introduce engineers and technicians to the eV+ programming language, used on the Fixed Robots.
Type of training
TCD24 – Mobile Robot Programming
This course is designed to train engineers and technicians how to use Omron Autonomous Mobile Robots.
Type of training
TCD25 - Fleet Management
This course is designed to train engineers and technicians how to use the Omron Fleet Manager for Autonomous Mobile Robots.
Type of training
TCD35 – ACE Sight (Vision)
This course is designed to introduce engineers and technicians to the ACE Sight Vision tools within Omron’s robotic software.
Type of training
TC121 - Maintenance Training Course Specific to Sysmac
These courses are ideally suited for maintenance personnel and those who are involved in commissioning a machine equipped with NX/NJ controllers. But they are also for those who want to have a first introduction to the maintenance tools available for these products.
Type of training
£1,088 | By arrangement |
TC101 - Customised One-to-One
This is a customised training course, for one attendee, designed to your specific needs. We will develop the course based on your specific requirements.
Type of training
£598 | By arrangement |
TC102 - Customised One-to-N
This is a customised training course, for up to 8 attendees, designed to your specific needs. We will develop the course based on your specific requirements.
Type of training
£544 | By arrangement |
TC103 - Customised On-Site
This is a customised training course designed to your specific needs. We will develop the course based on your specific requirements. In preparation, we can visit your site, and discuss your exact requirements.
Type of training
£1,632 | By arrangement |
TC250 - Automation Pack – PLC Week
This course combines the TC01 and TC02 automation courses, on 5 consecutive days.
Type of training
TC251 - Sysmac Pack 1 - Sysmac Studio & NA HMI Visualisation
This course combines the TC51 and TC55 courses, on 3 consecutive days, to introduce engineers and technicians to the integration of the Sysmac controller and the Sysmac NA HMI.
Type of training
TC252 - Sysmac Pack 2 - NA HMI Visualisation & Motion
This course combines the TC54 and TC55 courses, on 3 consecutive days, to introduce engineers and technicians to Sysmac motion and the Sysmac NA HMI.
Type of training
TC253 - Sysmac Pack 3 - Sysmac Studio, NA HMI Visualisation & Motion (Sysmac week)
This course combines the TC51, TC54 and TC55 courses, to introduce engineers and technicians, to the integrated Sysmac solution, using the NJ controller NA HMI and Sysmac motion.
Type of training
TC261 – Collaborative Robot Training Pack 1
This course combines the TC114 and TC115 Collaborative robot courses on 4 consecutive days
Type of training
TC271 – Fixed Robot Training Pack 1
This course combines the TCD21 and TCD35 fixed robot courses on 3 consecutive days.
Type of training
TC280 – Mobile Robot (AMR) Training Pack 1
This course combines the TCD24 and TCD25 mobile robot courses on 5 consecutive days, delivered at your site (subject to customer robot and fleet manager availability).
Type of training
TC281 – Mobile Robot (AMR) Training Pack 2
This course combines the TCD24 and TCD25 mobile robot courses on 5 consecutive days, delivered in our MK training room (subject to availability).