Specifications & ordering info
(Connection Cable between Preamplifier and Amplifier Unit is not provided with the Sensor Head. Be sure to have the Connection Cable ready when using the Sensor.)
|Straight type||5 mm||0.1 μm||E9NC-TH5S 2M|
|Right-angle air type||E9NC-TH5L 2M|
|Flanged type/Straight type||E9NC-TH5SF 2M|
|Flanged type/Right-angle air type||E9NC-TH5LF 2M|
|Straight type||12 mm||E9NC-TH12S 2M|
|Right-angle air type||E9NC-TH12L 2M|
|Flanged type/Straight type||E9NC-TH12SF 2M|
|Flanged type/Right-angle air type||E9NC-TH12LF 2M|
A Sensor Communications Unit is required if you want to use the Amplifier Unit on a network.
|NPN output||PNP output|
|ON/OFF output||E9NC-TA21 2M||E9NC-TA51 2M|
Connection Cable between Preamplifier and Amplifier Unit
|Cable length||Quantity||Order code|
Accessories (Sold Separately)
Sensor Head Accessories
The E9NC-TB1 is provided with the Sensor Head. Order replacements as required.
|Probe for flat surfaces||1||E9NC-TB3|
A rubber boot is provided with the Sensor Head. Order replacements as required.
|Applicable Sensor Head||Quantity||Order code|
Amplifier Unit Accessories
Amplifier Unit Mounting Bracket
A Mounting Bracket is not provided with the Amplifier Unit. It must be ordered separately as required.
A DIN Track is not provided with the Amplifier Unit. It must be ordered separately as required.
|Shallow type, total length: 1 m||1||PFP-100N|
|Shallow type, total length: 0.5 m||1||PFP-50N|
|Deep type, total length: 1 m||1||PFP-100N2|
An End Plate is not provided with the Amplifier Unit. It must be ordered separately as required.
Attach these Covers to Amplifier Units. Order a Cover when required, e.g., if you lose the covers.
Sensor Communications Units
|Sensor Communications Unit
|Sensor Communications Unit for CC-Link||E3NW-CCL|
|Distributed Sensor Unit
The Distributed Sensor Unit can be connected to any of the Sensor Communications Units.
Refer to your OMRON website for details.
The E9NC-TA0 is supported for firmware version 1.03 or higher (Sensor Communications Units manufactured in July 2014 or later).
EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.
CC-Link is a registered trademark of Mitsubishi Electric Corporation. The trademark is managed by the CC-Link Partner Association.
How can we help you?
If you have a question or would like to ask for a quote, please contact us or send a request.
Thank you for submitting your request. We will come back to you as soon as possible.
We are experiencing technical difficulties. Your form submission has not been successful. Please accept our apologies and try again later. Details: [details]Download
Handles measurement applications in harsh environments. Tough under vibration and shock (due to ball spline mechanism), water resistant (Magnetic Sensing Method) and withstands bending of robot cables.
Handles measurement applications with limited space with the help of slim, short sensor heads (8mm outside diameter) and slim amplifier units (only 10mm wide).
Handles advances measurement applications. Data communications & high precision data transmission carried out via field networks (0.1-μm resolution). Can connect up to 30 sensors with reduced wiring, and holds eight calculation functions including maximum value, minimum value, flatness, average, step, twist, warp and thickness.